Introductory Pricing Until Oct. 31st 2019!
Custom Terminated Neotech NEMOI-3220 RCA Interconnect
We have made it easy to order custom terminated interconnect for your audio system or home theatre. Custom cables can be ordered in the lengths you need in just a few clicks.
Neotech NEMOI-3220 This interconnect cable combines PTFE insulation and pure OCC copper conductors with a rectangular cross section has a particular architecture allowing a strong reduction in the inductance and capacitance effect. If you are looking for a high resolution cable, the Neotech NEMOI 3220 is an excellent choice.
Our measurements are done on actual finished cables,
these results can be quite different than the manufacturer specs for
the same cable. Measurements for raw unterminated cables are usually
based on conductor-conductor and conductor-shield readings on long
lengths of unterminated cable.
per ft measurements are a good guideline to determine the suitability
of a cable for an application but in most cases they cannot be
extrapolated to give you the specs of a given length of finished cable.
The reason for this is that they do not take into consideration the
variables that come into play when a cable is terminated such as
telescoped shields, conductor grouping and the connectors themselves. The results below are for the finished cable of the noted length.
All cable testing is performed on an Instek LCR-819 at 1kHz, 1V, 20C
|Length of Cable Under Test
|Capacitance (cond-cond): 84.876 pF
|Inductance (cond-cond): .00071 mH
|Resistance: .05230 Ohm
The base $152.95 (CDN) cable consists of:
(1) 3 ft Neotech NEMOI-3220 Deep Cryo Treated RCA Interconnect, terminated with Furutech FT-111(G) connectors.. The price will adjust automatically when you choose a different length. PLEASE NOTE: the base price is for 1 cable, if you need a stereo pair (or more) change the quantity to the number required. You can order as many cables as you need, in different lengths and terminations by hitting the "order" button after selecting each cable.
The Furutech FT-111(G) RCA connectors are a low mass locking connector with stainless steel barrel and Gold plated, pure copper contacts. These connectors use a solderless setscrew connection for the conductors. We expand on the non-resonant qualities of this plug by using an injection technique to fill the voids of the connector and seal the contact area from the atmosphere.
the cable length you need for your application, then press the order
button. The total cost of the cable will appear in the shopping cart at
the top of the right hand navigation bar. Click
"view cart" to see an itemized list of the cables ordered. Shipping
cost and any applicable taxes will be applied during checkout. Once the order is placed the cables are constructed
to your specs and will ship next business day unless you decide to have
them pre-conditioned on our cable cooker. Please allow five days for
the pre-conditioning process.
If you have your cables pre-conditioned
(burned in) on our audiodharma Cable Cooker they will require only a
minimal amount of time to reach their full potential, typically about one
day of normal use to settle in and another 2-3 days of normal use to
reach about 90-95% of it's full potential.
The parts used in this cable have been Deep Cryo Treated by Take Five Audio, click HERE for full details on our process.