Belden 1505F MKII Subwoofer Cable Deep Cryo Treated
Belden 1505F MKII Subwoofer Cable, Deep Cryo Treated, Custom Length
Our PriceCAD $76.07
Our New Belden 1505F MKII Subwoofer Cable
We have made a couple of upgrades to our 1505F subwoofer cable, the new version is now the MK II. Our MK II version uses the Rhodium plated Furutech 126. The Furutech 126 uses an OCC center pin which gives a better low bass response than the bronze pin of the Furutech 162. The 126 has a much firmer grip than the 162 which is important in a subwoofer application, the Rhodium plating also renders more detail in the low bass. These custom subwoofer
cables can be ordered in various lengths up to 100 feet.
Belden 1505F is a double shielded 59/RU type coaxial cable that is extremely well suited for a subwoofer application. It has a heavy double-braid shield layer for the best
possible rejection of low-frequency hum, and extremely low
capacitance for the flattest possible frequency response. The 1505F used in this cable is Deep Cryo Treated by us on-site using our custom built Cryotron processor and our custom profile.
Our measurements are done on actual finished cables,
these results can be quite different than the manufacturer specs for
the same cable. Measurements for raw unterminated cables are usually
based on conductor-conductor and conductor-shield readings on long
lengths of unterminated cable.
per ft measurements are a good guideline to determine the suitability
of a cable for an application but in most cases they cannot be
extrapolated to give you the specs of a given length of finished cable.
The reason for this is that they do not take into consideration the
variables that come into play when a cable is terminated such as
telescoped shields, conductor grouping and the connectors themselves. The results below are for the finished cable of the noted length.
All cable testing is performed on an Instek LCR-819 at 1kHz, 1V, 20C
|Length of Cable Under Test
|Capacitance: 92.968 pF
|Inductance: .00063 mH
|Resistance: .06064 Ohm
The base $76.07 (CDN) cable consists of:
(1) 3ft Deep Cryo Treated Belden 1505F subwoofer cable terminated with fully shielded Furutech 126(R) RCA connectors. The price will adjust automatically when you choose a different length. PLEASE NOTE: the base price is for 1 cable, if you need a stereo pair (or more) change the quantity to the number required. You can order as many cables as you need, in different lengths by hitting the "order" button after selecting each cable.
The Furutech 126(R) RCAs feature a Rhodium Plated OCC Copper center pin with copper alloy body and Teflon
insulation. All metallic parts are treated by
*FURUTECH α(Alpha) Process (Super Cryogenic & Demagnetize Treatment ) Solder termination is done using a precision OK International MFR Cartridge System and Mundorf Supreme solder.
the cable length, then press the order
button. The total cost of the cable will appear in the shopping cart at
the top of the right hand navigation bar. Click
"view cart" to see an itemized list of the cables ordered. Shipping
cost and any applicable taxes will be applied during checkout. Once the order is placed the cables are constructed
to your specs and will ship next business day unless you decide to have
them pre-conditioned on our cable cooker. Please allow four days for
the pre-conditioning process.
If you have your cables pre-conditioned
(burned in) on our audiodharma Cable Cooker they will require only a
minimal amount of time to reach their full potential, typically about one
day of normal use to settle in and another 2-3 days of normal use to
reach about 90-95% of it's full potential.
The parts used in this cable have been Deep Cryo Treated by Take Five Audio, click HERE for full details on our process.
Belden 5000UE 12 awg Speaker Cable, 100 ft
Hubbell 5362W Heavy Duty Grade Outlet White Cryo Treated
Hubbell 5362W Heavy Duty Grade Outlet, 125V 20A, White, Deep Cryo Treated
Click For Full Description
Mundorf Supreme Solder, 10 gm pack