Belden 1505F Subwoofer Cable Deep Cryo Treated
Belden 1505F Subwoofer Cable, Deep Cryo Treated, Custom Length
Our PriceCAD $51.92
CodeDCT 1505F SUB
Our New Custom Length Belden 1505F Subwoofer Cable
are now offering custom length subwoofer cables made from Deep Cryo Treated Belden 1505F
terminated with fully shielded Furutech 162(G) RCA connectors. These custom subwoofer
cables can be ordered in various lengths up to 100 feet in just a few
clicks, it's that easy!
Belden 1505F is a double shielded 59/RU type coaxial cable that is extremely well suited for a subwoofer application. It has a heavy double-braid shield layer for the best
possible rejection of low-frequency hum, and extremely low
capacitance for the flattest possible frequency response. We are using the Deep Cryo Treated version in this cable build.
Our measurements are done on actual finished cables,
these results can be quite different than the manufacturer specs for
the same cable. Measurements for raw unterminated cables are usually
based on conductor-conductor and conductor-shield readings on long
lengths of unterminated cable.
per ft measurements are a good guideline to determine the suitability
of a cable for an application but in most cases they cannot be
extrapolated to give you the specs of a given length of finished cable.
The reason for this is that they do not take into consideration the
variables that come into play when a cable is terminated such as
telescoped shields, conductor grouping and the connectors themselves. The results below are for the finished cable of the noted length.
All cable testing is performed on an Instek LCR-819 at 1kHz, 1V, 20C
|Length of Cable Under Test
|Capacitance: 92.968 pF
|Inductance: .00063 mH
|Resistance: .06064 Ohm
The base $51.92 (CDN) cable consists of:
(1) 3ft Deep Cryo Treated Belden 1505F subwoofer cable terminated with fully shielded Furutech 162(G) RCA connectors. The price will adjust automatically when you choose a different length. PLEASE NOTE: the base price is for 1 cable, if you need a stereo pair (or more) change the quantity to the number required. You can order as many cables as you need, in different lengths by hitting the "order" button after selecting each cable.
The Furutech 162(G) RCAs feature a Gold Plated Bronze center pin with brass body and Teflon
insulation. All metallic parts are treated by
*FURUTECH α(Alpha) Process (Super Cryogenic & Demagnetize Treatment ) Solder termination is done using a precision OK International MFR Cartridge System and Mundorf Supreme solder.
the cable length, then press the order
button. The total cost of the cable will appear in the shopping cart at
the top of the right hand navigation bar. Click
"view cart" to see an itemized list of the cables ordered. Shipping
cost and any applicable taxes will be applied during checkout. Once the order is placed the cables are constructed
to your specs and will ship next business day unless you decide to have
them pre-conditioned on our cable cooker. Please allow four days for
the pre-conditioning process.
If you have your cables pre-conditioned
(burned in) on our audiodharma Cable Cooker they will require only a
minimal amount of time to reach their full potential, typically about one
day of normal use to settle in and another 2-3 days of normal use to
reach about 90-95% of it's full potential.
The parts used in this cable have been Deep Cryo Treated by Take Five Audio, click HERE for full details on our process.